Re: Adding more memory = hugh cpu load

Lists: pgsql-performance
From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Subject: Adding more memory = hugh cpu load
Date: 2011-10-10 13:26:44
Message-ID: 4E92F294.9010405@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Hi,

Yesterday, a customer increased the server memory from 16GB to 48GB.

Today, the load of the server hit 40 ~ 50 points.
With 16 GB, the load not surpasses 5 ~ 8 points.

The only parameter that I changed is effective_cache_size (from 14 GB to
40GB) and shared_buffers (from 1 GB to 5 GB). Setting the values back
does not take any effect.

This server use CentOS 5.5 (2.6.18-194.3.1.el5.centos.plus - X86_64).
Should I change some vm parameters to this specific kernel ?

Thanks for any help.


From: "Kevin Grittner" <Kevin(dot)Grittner(at)wicourts(dot)gov>
To: "alexandre - aldeia digital" <adaldeia(at)gmail(dot)com>, <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 13:51:08
Message-ID: 4E92B1FC0200002500041C95@gw.wicourts.gov
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

alexandre - aldeia digital <adaldeia(at)gmail(dot)com> wrote:

> Yesterday, a customer increased the server memory from 16GB to
> 48GB.

That's usually for the better, but be aware that on some hardware
adding RAM beyond a certain point causes slower RAM access. Without
knowing more details, it's impossible to say whether that's the case
here.

> Today, the load of the server hit 40 ~ 50 points.
> With 16 GB, the load not surpasses 5 ~ 8 points.

Are you talking about "load average", CPU usage, or something else?

> The only parameter that I changed is effective_cache_size (from 14
> GB to 40GB) and shared_buffers (from 1 GB to 5 GB). Setting the
> values back does not take any effect.

What version of PostgreSQL is this? What settings are in effect?
How many user connections are active at one time? How many cores
are there, of what type? What's the storage system? What kind of
load is this?

http://wiki.postgresql.org/wiki/Guide_to_reporting_problems
http://wiki.postgresql.org/wiki/Server_Configuration

-Kevin


From: Shaun Thomas <sthomas(at)peak6(dot)com>
To: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
Cc: <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 14:04:55
Message-ID: 4E92FB87.1030703@peak6.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/10/2011 08:26 AM, alexandre - aldeia digital wrote:

> Yesterday, a customer increased the server memory from 16GB to 48GB.
>
> Today, the load of the server hit 40 ~ 50 points.
> With 16 GB, the load not surpasses 5 ~ 8 points.

That's not entirely surprising. The problem with having lots of memory
is... that you have lots of memory. The operating system likes to cache,
and this includes writes. Normally this isn't a problem, but with 48GB
of RAM, the defaults (for CentOS 5.5 in particular) are to use up to 40%
of that to cache writes.

The settings you're looking for are in:

/proc/sys/vm/dirty_background_ratio
/proc/sys/vm/dirty_ratio

You can set these by putting lines in your /etc/sysctl.conf file:

vm.dirty_background_ratio = 1
vm.dirty_ratio = 10

And then calling:

sudo sysctl -p

The first number, the background ratio, tells the memory manager to
start writing to disk as soon as 1% of memory is used. The second is
like a maximum of memory that can be held for caching. If the number of
pending writes exceeds this, the system goes into synchronous write
mode, and blocks all other write activity until it can flush everything
out to disk. You really, really want to avoid this.

The defaults in older Linux systems were this high mostly to optimize
for desktop performance. For CentOS 5.5, the defaults are 10% and 40%,
which doesn't seem like a lot. But for servers with tons of ram, 10% of
48GB is almost 5GB. That's way bigger than all but the largest RAID or
controller cache, which means IO waits, and thus high load. Those high
IO waits cause a kind of cascade that slowly cause writes to back up,
making it more likely you'll reach the hard 40% limit which causes a
system flush, and then you're in trouble.

You can actually monitor this by checking /proc/meminfo:

grep -A1 Dirty /proc/meminfo

The 'Dirty' line tells you how much memory *could* be written to disk,
and the 'Writeback' line tells you how much the system is trying to
write. You want that second line to be 0 or close to it, as much as
humanly possible. It's also good to keep Dirty low, because it can be an
indicator that the system is about to start uncontrollably flushing if
it gets too high.

Generally it's good practice to keep dirty_ratio lower than the size of
your disk controller cache, but even high-end systems only give 256MB to
1GB of controller cache. Newer kernels have introduced dirty_bytes and
dirty_background_bytes, which lets you set a hard byte-specified limit
instead of relying on some vague integer percentage of system memory.
This is better for systems with vast amounts of memory that could cause
these kinds of IO spikes. Of course, in order to use those settings,
your client will have to either install a custom kernel, or upgrade to
CentOS 6. Try the 1% first, and it may work out.

Some kernels have a hard 5% limit on dirty_background_ratio, but the one
included in CentOS 5.5 does not. You can even set it to 0, but your IO
throughput will take a nosedive, because at that point, it's always
writing to disk without any effective caching at all. The reason we set
dirty_ratio to 10%, is because we want to reduce the total amount of
time a synchronous IO block lasts. You can probably take that as low as
5%, but be careful and test to find your best equilibrium point. You
want it at a point it rarely blocks, but if it does, it's over quickly.

There's more info here:

http://www.westnet.com/~gsmith/content/linux-pdflush.htm

(I only went on about this because we had the same problem when we
increased from 32GB to 72GB. It was a completely unexpected reaction,
but a manageable one.)

--
Shaun Thomas
OptionsHouse | 141 W. Jackson Blvd. | Suite 800 | Chicago IL, 60604
312-676-8870
sthomas(at)peak6(dot)com

______________________________________________

See http://www.peak6.com/email-disclaimer/ for terms and conditions related to this email


From: Leonardo Francalanci <m_lists(at)yahoo(dot)it>
To: "sthomas(at)peak6(dot)com" <sthomas(at)peak6(dot)com>, alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
Cc: "pgsql-performance(at)postgresql(dot)org" <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 15:14:35
Message-ID: 1318259675.10344.YahooMailNeo@web29011.mail.ird.yahoo.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

> That's not entirely surprising. The problem with having lots of memory is...
> that you have lots of memory. The operating system likes to cache, and this
> includes writes. Normally this isn't a problem, but with 48GB of RAM, the
> defaults (for CentOS 5.5 in particular) are to use up to 40% of that to cache
> writes.

I don't understand: don't you want postgresql to issue the fsync calls when
it "makes sense" (and configure them), rather than having the OS decide
when it's best to flush to disk? That is: don't you want all the memory to
be used for caching, unless postgresql says otherwise (calling fsync), instead
of "as soon as 1% of memory is used"?


From: Shaun Thomas <sthomas(at)peak6(dot)com>
To: Leonardo Francalanci <m_lists(at)yahoo(dot)it>
Cc: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>, "pgsql-performance(at)postgresql(dot)org" <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 15:39:08
Message-ID: 4E93119C.8090407@peak6.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/10/2011 10:14 AM, Leonardo Francalanci wrote:

> I don't understand: don't you want postgresql to issue the fsync
> calls when it "makes sense" (and configure them), rather than having
> the OS decide when it's best to flush to disk? That is: don't you
> want all the memory to be used for caching, unless postgresql says
> otherwise (calling fsync), instead of "as soon as 1% of memory is
> used"?

You'd think that, which is why this bites so many people. That's not
quite how it works in practice, though. OS cache is a lot more than
altered database and WAL files, which do get fsync'd frequently. Beyond
that, you need to worry about what happens *between* fsync calls.

On a highly loaded database, or even just a database experiencing heavy
write volume due to some kind of ETL process, your amount of dirty
memory may increase much more quickly than you expect. For example, say
your checkpoint_timeout setting is the default of five minutes. An ETL
process runs that loads 2GB of data into a table, and you're archiving
transaction logs. So you now have three possible write vectors, not
including temp tables and what not. And that's only for that connection;
this gets more complicated if you have other OLTP connections on the
same DB.

So your memory is now flooded with 2-6GB of data, and that's easy for
memory to handle, and it can do so quickly. With 48GB of RAM, that's
well within caching range, so the OS never writes anything until the
fsync call. Then the database makes the fsync call, and suddenly the OS
wants to flush 2-6GB of data straight to disk. Without that background
trickle, you now have a flood that only the highest-end disk controller
or a backing-store full of SSDs or PCIe NVRAM could ever hope to absorb.

That write flood massively degrades your read IOPS, and degrades future
writes until it's done flushing, so all of your disk IO is saturated,
further worsening the situation. Now you're getting closer and closer to
your dirty_ratio setting, at which point the OS will effectively stop
responding to anything, so it can finally finish flushing everything to
disk. This can take a couple minutes, but it's not uncommon for these IO
storms to last over half an hour depending on the quality of the
disks/controller in question. During this time, system load is climbing
precipitously, and clients are getting query timeouts.

Adding more memory can actually make your system performance worse if
you don't equally increase the capability of your RAID/SAN/whatever to
compensate for increased size of write chunks.

This is counter-intuitive, but completely borne out by tests. The kernel
developers agree, or we wouldn't have dirty_bytes, or
dirty_background_bytes, and they wouldn't have changed the defaults to
5% and 10% instead of 10% and 40%. It's just one of those things nobody
expected until machines with vast amounts of RAM started becoming common.

--
Shaun Thomas
OptionsHouse | 141 W. Jackson Blvd. | Suite 800 | Chicago IL, 60604
312-676-8870
sthomas(at)peak6(dot)com

______________________________________________

See http://www.peak6.com/email-disclaimer/ for terms and conditions related to this email


From: Greg Smith <greg(at)2ndQuadrant(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 16:07:34
Message-ID: 4E931846.80509@2ndQuadrant.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/10/2011 10:04 AM, Shaun Thomas wrote:
> The problem with having lots of memory is... that you have lots of
> memory. The operating system likes to cache, and this includes writes.
> Normally this isn't a problem, but with 48GB of RAM, the defaults (for
> CentOS 5.5 in particular) are to use up to 40% of that to cache writes.

I make the same sort of tuning changes Shaun suggested on every CentOS 5
system I come across. That said, you should turn on log_checkpoints in
your postgresql.conf and see whether the "sync=" numbers are high. That
will help prove or disprove that the slowdown you're seeing is from too
much write caching. You also may be able to improve that by adjusting
checkpoint_segments/checkpoint_timeout, or *decreasing* shared_buffers.
More about this at
http://www.westnet.com/~gsmith/content/postgresql/chkp-bgw-83.htm

There are some other possibilities, too, like that memory addition can
actually causing average memory speed to drop as Kevin mentioned. I
always benchmark with stream-scaling:
https://github.com/gregs1104/stream-scaling before and after a RAM size
change, to see whether things are still as fast or not. It's hard to do
that in the position you're in now though.

--
Greg Smith 2ndQuadrant US greg(at)2ndQuadrant(dot)com Baltimore, MD
PostgreSQL Training, Services, and 24x7 Support www.2ndQuadrant.us


From: Leonardo Francalanci <m_lists(at)yahoo(dot)it>
To: "sthomas(at)peak6(dot)com" <sthomas(at)peak6(dot)com>
Cc: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>, "pgsql-performance(at)postgresql(dot)org" <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 16:14:37
Message-ID: 1318263277.56967.YahooMailNeo@web29013.mail.ird.yahoo.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

> Then the 

> database makes the fsync call, and suddenly the OS wants to flush 2-6GB of data
> straight to disk. Without that background trickle, you now have a flood that
> only the highest-end disk controller or a backing-store full of SSDs or PCIe
> NVRAM could ever hope to absorb.

Isn't checkpoint_completion_target supposed to deal exactly with that problem?

Plus: if 2-6GB is too much, why not decrease checkpoint_segments? Or
checkpoint_timeout?

> The kernel
> developers agree, or we wouldn't have dirty_bytes, or
> dirty_background_bytes, and they wouldn't have changed the defaults to 5%
> and 10% instead of 10% and 40%. 

I'm not saying that those kernel parameters are "useless"; I'm saying they are used
in  the same way as the checkpoint_segments, checkpoint_timeout and
checkpoint_completion_target are used by postgresql; and on a postgresql-only system
I would rather have postgresql look after the fsync calls, not the OS.


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To:
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 17:31:40
Message-ID: 4E932BFC.7070007@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Em 10-10-2011 11:04, Shaun Thomas wrote:
> That's not entirely surprising. The problem with having lots of memory
> is... that you have lots of memory. The operating system likes to cache,
> and this includes writes. Normally this isn't a problem, but with 48GB
> of RAM, the defaults (for CentOS 5.5 in particular) are to use up to 40%
> of that to cache writes.

Hi Shawn and all,

After change the parameters in sysctl.conf, during some time I see that
load average downs. But the system loads grow again.

Dirty memory in meminfo is about 150MB and Whriteback is mostly 0 kB.

I drop checkpoint_timeout to 1min and turn on log_checkpoint:

<2011-10-10 14:18:48 BRT >LOG: checkpoint complete: wrote 6885 buffers
(1.1%); 0 transaction log file(s) added, 0 removed, 1 recycled;
write=29.862 s, sync=28.466 s, total=58.651 s
<2011-10-10 14:18:50 BRT >LOG: checkpoint starting: time
<2011-10-10 14:19:40 BRT >LOG: checkpoint complete: wrote 6415 buffers
(1.0%); 0 transaction log file(s) added, 0 removed, 1 recycled;
write=29.981 s, sync=19.960 s, total=50.111 s
<2011-10-10 14:19:50 BRT >LOG: checkpoint starting: time
<2011-10-10 14:20:45 BRT >LOG: checkpoint complete: wrote 6903 buffers
(1.1%); 0 transaction log file(s) added, 0 removed, 1 recycled;
write=29.653 s, sync=25.504 s, total=55.477 s
<2011-10-10 14:20:50 BRT >LOG: checkpoint starting: time
<2011-10-10 14:21:45 BRT >LOG: checkpoint complete: wrote 7231 buffers
(1.1%); 0 transaction log file(s) added, 0 removed, 2 recycled;
write=29.911 s, sync=24.899 s, total=55.037 s
<2011-10-10 14:21:50 BRT >LOG: checkpoint starting: time
<2011-10-10 14:22:45 BRT >LOG: checkpoint complete: wrote 6569 buffers
(1.0%); 0 transaction log file(s) added, 0 removed, 1 recycled;
write=29.947 s, sync=25.303 s, total=55.342 s
<2011-10-10 14:22:50 BRT >LOG: checkpoint starting: time
<2011-10-10 14:23:44 BRT >LOG: checkpoint complete: wrote 5711 buffers
(0.9%); 0 transaction log file(s) added, 0 removed, 1 recycled;
write=30.036 s, sync=24.299 s, total=54.507 s
<2011-10-10 14:23:50 BRT >LOG: checkpoint starting: time
<2011-10-10 14:24:50 BRT >LOG: checkpoint complete: wrote 6744 buffers
(1.0%); 0 transaction log file(s) added, 0 removed, 2 recycled;
write=29.946 s, sync=29.792 s, total=60.223 s
<2011-10-10 14:24:50 BRT >LOG: checkpoint starting: time

[root(at)servernew data]# vmstat 1 30 -w
procs -------------------memory------------------ ---swap-- -----io----
--system-- -----cpu-------
r b swpd free buff cache si so bi bo
in cs us sy id wa st
22 0 2696 8290280 117852 38431540 0 0 328 59
9 17 17 3 79 1 0
34 0 2696 8289288 117852 38432268 0 0 8 2757
2502 4148 80 20 0 0 0
39 1 2696 8286128 117852 38432348 0 0 24 622
2449 4008 80 20 0 0 0
41 0 2696 8291100 117852 38433792 0 0 64 553
2487 3419 83 17 0 0 0
42 1 2696 8293596 117852 38434556 0 0 232 776
2372 2779 83 17 0 0 0
44 1 2696 8291984 117852 38435252 0 0 56 408
2388 3012 82 18 0 0 0
26 0 2696 8289884 117856 38435924 0 0 64 698
2486 3283 83 17 0 0 0
31 0 2696 8286788 117856 38437052 0 0 88 664
2452 3385 82 18 0 0 0
42 0 2696 8284500 117868 38437516 0 0 176 804
2492 3876 83 17 0 0 0
44 0 2696 8281392 117868 38438860 0 0 24 504
2338 2916 80 20 0 0 0
44 0 2696 8278540 117868 38439152 0 0 32 568
2337 2937 83 17 0 0 0
45 0 2696 8280280 117868 38440348 0 0 72 402
2492 3635 84 16 0 0 0
35 2 2696 8279928 117868 38440388 0 0 184 600
2492 3835 84 16 0 0 0
41 0 2696 8275948 117872 38441712 0 0 136 620
2624 4187 79 21 0 0 0
37 0 2696 8274392 117872 38442372 0 0 24 640
2492 3824 84 16 0 0 0
40 0 2696 8268548 117872 38443120 0 0 0 624
2421 3584 81 19 0 0 0
32 0 2696 8268308 117872 38443652 0 0 16 328
2384 3767 81 19 0 0 0
38 0 2696 8281820 117872 38427472 0 0 72 344
2505 3810 81 19 0 0 0
41 0 2696 8279776 117872 38427976 0 0 16 220
2496 3428 84 16 0 0 0
27 0 2696 8283252 117872 38428508 0 0 112 312
2563 4279 81 19 0 0 0
36 0 2696 8280332 117872 38429288 0 0 48 544
2626 4406 80 20 0 0 0
30 0 2696 8274372 117872 38429372 0 0 24 472
2442 3646 80 19 0 0 0
38 0 2696 8272144 117872 38429956 0 0 152 256
2465 4039 83 16 0 0 0
41 2 2696 8266496 117872 38430324 0 0 56 304
2414 3206 82 18 0 0 0
32 0 2696 8267188 117872 38431068 0 0 64 248
2540 4211 78 22 0 0 0
37 0 2696 8278876 117872 38431324 0 0 56 264
2547 4523 81 19 0 0 0
43 1 2696 8277460 117872 38431588 0 0 40 8627
2695 4143 82 18 0 0 0
41 0 2696 8272556 117872 38431716 0 0 40 216
2495 3744 79 21 0 0 0
40 1 2696 8267292 117876 38433204 0 0 192 544
2586 4437 77 23 0 0 0
34 1 2696 8263204 117876 38433628 0 0 320 929
2841 5166 78 22 0 0 0

Notice that we have no idle % in cpu column.

[root(at)servernew data]# uptime
14:26:47 up 2 days, 3:26, 4 users, load average: 48.61, 46.12, 40.47

My client wants to remove the extra memory... :/

Best regards.


From: "Kevin Grittner" <Kevin(dot)Grittner(at)wicourts(dot)gov>
To: "alexandre - aldeia digital" <adaldeia(at)gmail(dot)com>
Cc: <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 17:46:44
Message-ID: 4E92E9340200002500041CD5@gw.wicourts.gov
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

alexandre - aldeia digital <adaldeia(at)gmail(dot)com> wrote:

> Notice that we have no idle % in cpu column.

So they're making full use of all the CPUs they paid for. That in
itself isn't a problem. Unfortunately you haven't given us nearly
enough information to know whether there is indeed a problem, or if
so, what. What was throughput before? What is it now? How has
latency been affected? And all those unanswered questions from my
first email....

The problem *might* be something along the lines of most of the
discussion on the thread. It might not be. I just don't know yet,
myself.

> 14:26:47 up 2 days, 3:26, 4 users, load average: 48.61,
> 46.12, 40.47

This has me wondering again about your core count and your user
connections.

> My client wants to remove the extra memory... :/

Maybe we should identify the problem. It might be that a connection
pooler is the solution. On the other hand, if critical production
applications are suffering, it might make sense to take this out of
production and figure out a safer place to test things and sort this
out.

-Kevin


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To:
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 18:54:03
Message-ID: 4E933F4B.2080808@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Em 10-10-2011 14:46, Kevin Grittner escreveu:
> alexandre - aldeia digital<adaldeia(at)gmail(dot)com> wrote:
>
>> Notice that we have no idle % in cpu column.
>
> So they're making full use of all the CPUs they paid for. That in
> itself isn't a problem. Unfortunately you haven't given us nearly
> enough information to know whether there is indeed a problem, or if
> so, what. What was throughput before? What is it now? How has
> latency been affected? And all those unanswered questions from my
> first email....
>
> The problem *might* be something along the lines of most of the
> discussion on the thread. It might not be. I just don't know yet,
> myself.

From the point of view of the client, the question is simple: until the
last friday (with 16 GB of RAM), the load average of server rarely
surpasses 4. Nothing change in normal database use.

Tonight, we will remove the extra memory. :/

Best regards.


From: "Kevin Grittner" <Kevin(dot)Grittner(at)wicourts(dot)gov>
To: "alexandre - aldeia digital" <adaldeia(at)gmail(dot)com>
Cc: <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 19:39:28
Message-ID: 4E9303A00200002500041CFE@gw.wicourts.gov
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

alexandre - aldeia digital <adaldeia(at)gmail(dot)com> wrote:

> From the point of view of the client, the question is simple:
> until the last friday (with 16 GB of RAM), the load average of
> server rarely surpasses 4. Nothing change in normal database use.

Really? The application still performs as well or better, and it's
the load average they care about? How odd.

If they were happy with performance before the RAM was added, why
did they add it? If they weren't happy with performance, what led
them to believe that adding more RAM would help? If there's a
performance problem, there's generally one bottleneck which is the
limit, with one set of symptoms. When you remove that bottleneck
and things get faster, you may well have a new bottleneck with
different symptoms. (These symptoms might include high load average
or CPU usage, for example.) You then figure out what is causing
*that* bottleneck, and you can make things yet faster.

In this whole thread you have yet to give enough information to know
for sure whether there was or is any performance problem, or what
the actual bottleneck is. I think you'll find that people happy to
help identify the problem and suggest solutions if you provide that
information.

-Kevin


From: Shaun Thomas <sthomas(at)peak6(dot)com>
To: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
Cc: undisclosed-recipients:;, <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 20:25:54
Message-ID: 4E9354D2.8010608@peak6.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/10/2011 12:31 PM, alexandre - aldeia digital wrote:

> <2011-10-10 14:18:48 BRT >LOG: checkpoint complete: wrote 6885 buffers
> (1.1%); 0 transaction log file(s) added, 0 removed, 1 recycled;
> write=29.862 s, sync=28.466 s, total=58.651 s

28.466s sync time?! That's horrifying. At this point, I want to say the
increase in effective_cache_size or shared_buffers triggered the planner
to change one of your plans significantly enough it's doing a ton more
disk IO and starving out your writes. Except you said you changed it
back and it's still misbehaving.

This also reminds me somewhat of an issue Greg mentioned a while back
with xlog storms in 9.0 databases. I can't recall how he usually "fixed"
these, though.

--
Shaun Thomas
OptionsHouse | 141 W. Jackson Blvd. | Suite 800 | Chicago IL, 60604
312-676-8870
sthomas(at)peak6(dot)com

______________________________________________

See http://www.peak6.com/email-disclaimer/ for terms and conditions related to this email


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To:
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 20:34:45
Message-ID: 4E9356E5.6000308@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Em 10-10-2011 16:39, Kevin Grittner escreveu:
> alexandre - aldeia digital<adaldeia(at)gmail(dot)com> wrote:
>
>> From the point of view of the client, the question is simple:
>> until the last friday (with 16 GB of RAM), the load average of
>> server rarely surpasses 4. Nothing change in normal database use.
>
> Really? The application still performs as well or better, and it's
> the load average they care about? How odd.
>
> If they were happy with performance before the RAM was added, why
> did they add it? If they weren't happy with performance, what led
> them to believe that adding more RAM would help? If there's a
> performance problem, there's generally one bottleneck which is the
> limit, with one set of symptoms. When you remove that bottleneck
> and things get faster, you may well have a new bottleneck with
> different symptoms. (These symptoms might include high load average
> or CPU usage, for example.) You then figure out what is causing
> *that* bottleneck, and you can make things yet faster.

Calm down: if the client plans to add , for example, another database
in his server in a couple of weeks, he must only upgrade when this new
database come to life and add another point of doubt ??? IMHO, the
reasons to add MEMORY does not matters in this case. I came to the list
to see if anyone else has experienced the same problem, that not
necessarily is related with Postgres. Shaun and Greg apparently had the
same the same problems in CentOS and the information provided by they
helped too much...


From: "Kevin Grittner" <Kevin(dot)Grittner(at)wicourts(dot)gov>
To: "alexandre - aldeia digital" <adaldeia(at)gmail(dot)com>
Cc: <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 20:52:05
Message-ID: 4E9314A50200002500041D12@gw.wicourts.gov
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

alexandre - aldeia digital <adaldeia(at)gmail(dot)com> wrote:

> I came to the list to see if anyone else has experienced the same
> problem

A high load average or low idle CPU isn't a problem, it's a
potentially useful bit of information in diagnosing a problem. I
was hoping to hear what the actual problem was, since I've had a few
problems in high RAM situations, but the solutions depend on what
the actual problems are. I don't suppose you saw periods where
queries which normally run very quickly (say in a millisecond or
less) were suddenly taking tens of seconds to run -- "stalling" and
then returning to normal? Because if I knew you were having a
problem like *that* I might have been able to help. Same for other
set of symptoms; it's just the suggestions would have been
different. And the suggestions would have depended on what your
system looked like besides the RAM.

If you're satisfied with how things are running with less RAM,
though, there's no need.

-Kevin


From: Samuel Gendler <sgendler(at)ideasculptor(dot)com>
To: Kevin Grittner <Kevin(dot)Grittner(at)wicourts(dot)gov>
Cc: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>, pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-10 22:02:16
Message-ID: CAEV0TzD8uae+1yqK3Z9XYL9_S57ZJHz3w-UirHaCvSj=XodiYQ@mail.gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On Mon, Oct 10, 2011 at 1:52 PM, Kevin Grittner <Kevin(dot)Grittner(at)wicourts(dot)gov
> wrote:

> alexandre - aldeia digital <adaldeia(at)gmail(dot)com> wrote:
>
> > I came to the list to see if anyone else has experienced the same
> > problem
>
> A high load average or low idle CPU isn't a problem, it's a
> potentially useful bit of information in diagnosing a problem. I
> was hoping to hear what the actual problem was, since I've had a few
> problems in high RAM situations, but the solutions depend on what
> the actual problems are. I don't suppose you saw periods where
> queries which normally run very quickly (say in a millisecond or
> less) were suddenly taking tens of seconds to run -- "stalling" and
> then returning to normal? Because if I knew you were having a
> problem like *that* I might have been able to help. Same for other
> set of symptoms; it's just the suggestions would have been
> different. And the suggestions would have depended on what your
> system looked like besides the RAM.
>
> If you're satisfied with how things are running with less RAM,
> though, there's no need.
>

The original question doesn't actually say that performance has gone down,
only that cpu utilization has gone up. Presumably, with lots more RAM, it is
blocking on I/O a lot less, so it isn't necessarily surprising that CPU
utilization has gone up. The only problem would be if db performance has
gotten worse. Maybe I missed a message where that was covered? I don't see
it in the original query to the list.


From: Claudio Freire <klaussfreire(at)gmail(dot)com>
To: Samuel Gendler <sgendler(at)ideasculptor(dot)com>
Cc: Kevin Grittner <Kevin(dot)Grittner(at)wicourts(dot)gov>, alexandre - aldeia digital <adaldeia(at)gmail(dot)com>, pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 02:19:57
Message-ID: CAGTBQpaOOu_ADrD7h9Cn_EazPrz4=QQj+jTePyHGEvt7BjJi3g@mail.gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On Tue, Oct 11, 2011 at 12:02 AM, Samuel Gendler
<sgendler(at)ideasculptor(dot)com> wrote:
> The original question doesn't actually say that performance has gone down,
> only that cpu utilization has gone up. Presumably, with lots more RAM, it is
> blocking on I/O a lot less, so it isn't necessarily surprising that CPU
> utilization has gone up.  The only problem would be if db performance has
> gotten worse. Maybe I missed a message where that was covered?  I don't see
> it in the original query to the list.

Load average (which is presumably the metric in question) includes
both processes using the CPU and processes waiting for I/O.
So it *would* be strange for load average to go up like that, if
database configuration remains the same (ie: equal query plans)


From: Greg Smith <greg(at)2ndQuadrant(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 06:42:42
Message-ID: 4E93E562.7080800@2ndQuadrant.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/10/2011 01:31 PM, alexandre - aldeia digital wrote:
> I drop checkpoint_timeout to 1min and turn on log_checkpoint:
>
> <2011-10-10 14:18:48 BRT >LOG: checkpoint complete: wrote 6885
> buffers (1.1%); 0 transaction log file(s) added, 0 removed, 1
> recycled; write=29.862 s, sync=28.466 s, total=58.651 s
> <2011-10-10 14:18:50 BRT >LOG: checkpoint starting: time

Sync times that go to 20 seconds suggest there's a serious problem here
somewhere. But it would have been better to do these changes one at a
time: turn on log_checkpoints, collect some data, then try lowering
checkpoint_timeout. A checkpoint every minute is normally a bad idea,
so that change may have caused this other issue.

> procs -------------------memory------------------ ---swap--
> -----io---- --system-- -----cpu-------
> r b swpd free buff cache si so bi
> bo in cs us sy id wa st
> 34 0 2696 8289288 117852 38432268 0 0 8
> 2757 2502 4148 80 20 0 0 0
> 39 1 2696 8286128 117852 38432348 0 0 24
> 622 2449 4008 80 20 0 0 0
> 41 0 2696 8291100 117852 38433792 0 0 64
> 553 2487 3419 83 17 0 0 0
> ...Notice that we have no idle % in cpu column.

You also have no waiting for I/O! This is just plain strange;
checkpoint sync time spikes with no I/O waits I've never seen before.
System time going to 20% isn't normal either.

I don't know what's going on with this server. What I would normally do
in this case is use "top -c" to see what processes are taking up so much
runtime, and then look at what they are doing with pg_stat_activity.
You might see the slow processes in the log files by setting
log_min_duration_statement instead. I'd be suspicious of Linux given
your situation though.

I wonder if increasing the memory is a coincidence, and the real cause
is something related to the fact that you had to reboot to install it.
You might have switched to a newer kernel in the process too, for
example; I'd have to put a kernel bug on the list of suspects with this
unusual vmstat output.

--
Greg Smith 2ndQuadrant US greg(at)2ndQuadrant(dot)com Baltimore, MD
PostgreSQL Training, Services, and 24x7 Support www.2ndQuadrant.us


From: Greg Smith <greg(at)2ndQuadrant(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 06:50:46
Message-ID: 4E93E746.10807@2ndQuadrant.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/10/2011 12:14 PM, Leonardo Francalanci wrote:
>
>> database makes the fsync call, and suddenly the OS wants to flush 2-6GB of data
>> straight to disk. Without that background trickle, you now have a flood that
>> only the highest-end disk controller or a backing-store full of SSDs or PCIe
>> NVRAM could ever hope to absorb.
>>
>
> Isn't checkpoint_completion_target supposed to deal exactly with that problem?
>

checkpoint_completion_targets spreads out the writes to disk.
PostgreSQL doesn't make any attempt yet to spread out the sync calls.
On a busy server, what can happen is that the whole OS write cache fills
with dirty data--none of which is written out to disk because of the
high kernel threshold--and then it all slams onto disk fast once the
checkpoint starts executing sync calls. Lowering the size of the Linux
write cache helps with that a lot, but can't quite eliminate the problem.

> Plus: if 2-6GB is too much, why not decrease checkpoint_segments? Or
> checkpoint_timeout?
>

Making checkpoints really frequent increases total disk I/O, both to the
database and to the WAL, significantly. You don't want to do that if
there's another way to achieve the same goal without those costs, which
is what some kernel tuning can do here. Just need to be careful not to
go too far; some write caching at the OS level helps a lot, too.

> I'm not saying that those kernel parameters are "useless"; I'm saying
> they are used
> in the same way as the checkpoint_segments, checkpoint_timeout and
> checkpoint_completion_target are used by postgresql; and on a postgresql-only system
> I would rather have postgresql look after the fsync calls, not the OS.
>

Except that PostgreSQL doesn't look after the fsync calls yet. I wrote
a patch for 9.1 that spread out the sync calls, similarly to how the
writes are spread out now. I wasn't able to prove an improvement
sufficient to commit the result. In the Linux case, the OS has more
information to work with about how to schedule I/O efficiently given how
the hardware is acting, and it's not possible for PostgreSQL to know all
that--not without duplicating a large portion of the kernel development
work at least. Right now, relying the kernel means that any
improvements there magically apply to any PostgreSQL version. So far
the results there have been beating out improvements made to the
database fast enough that it's hard to innovate in this area within
Postgres.

--
Greg Smith 2ndQuadrant US greg(at)2ndQuadrant(dot)com Baltimore, MD
PostgreSQL Training, Services, and 24x7 Support www.2ndQuadrant.us


From: Leonardo Francalanci <m_lists(at)yahoo(dot)it>
To: Greg Smith <greg(at)2ndQuadrant(dot)com>, "pgsql-performance(at)postgresql(dot)org" <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 08:57:57
Message-ID: 1318323477.19815.YahooMailNeo@web29005.mail.ird.yahoo.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

> checkpoint_completion_targets spreads out the writes to disk.  PostgreSQL 

> doesn't make any attempt yet to spread out the sync calls.  On a busy
> server, what can happen is that the whole OS write cache fills with dirty
> data--none of which is written out to disk because of the high kernel
> threshold--and then it all slams onto disk fast once the checkpoint starts
> executing sync calls.  Lowering the size of the Linux write cache helps with
> that a lot, but can't quite eliminate the problem.

Ok, I understand now

> Except that PostgreSQL doesn't look after the fsync calls yet.  I wrote a 

> patch for 9.1 that spread out the sync calls, similarly to how the writes are
> spread out now.  I wasn't able to prove an improvement sufficient to commit
> the result.  In the Linux case, the OS has more information to work with about
> how to schedule I/O efficiently given how the hardware is acting, and it's
> not possible for PostgreSQL to know all that--not without duplicating a large
> portion of the kernel development work at least.  Right now, relying the kernel
> means that any improvements there magically apply to any PostgreSQL version.  So
> far the results there have been beating out improvements made to the database
> fast enough that it's hard to innovate in this area within Postgres.

Ok; thank you very much for the explanation.

In fact, shouldn't those things be explained in the "WAL Configuration" section
of the manual? It looks as important as configuring Postgresql itself...
And: that applies to Linux. What about other OS, such as Solaris and FreeBSD?


From: Ivan Voras <ivoras(at)freebsd(dot)org>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 10:20:45
Message-ID: j7159t$jhf$1@dough.gmane.org
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 11/10/2011 00:02, Samuel Gendler wrote:

> The original question doesn't actually say that performance has gone down,
> only that cpu utilization has gone up. Presumably, with lots more RAM, it is
> blocking on I/O a lot less, so it isn't necessarily surprising that CPU
> utilization has gone up.

It's Linux - it counts IO wait in the load average. Again there are too
little details to be sure of anything, but it is possible that the IO
rate didn't go down.


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To:
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 11:54:42
Message-ID: 4E942E82.9010307@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Em 10-10-2011 23:19, Claudio Freire escreveu:
> On Tue, Oct 11, 2011 at 12:02 AM, Samuel Gendler
> <sgendler(at)ideasculptor(dot)com> wrote:
>> The original question doesn't actually say that performance has gone down,
>> only that cpu utilization has gone up. Presumably, with lots more RAM, it is
>> blocking on I/O a lot less, so it isn't necessarily surprising that CPU
>> utilization has gone up. The only problem would be if db performance has
>> gotten worse. Maybe I missed a message where that was covered? I don't see
>> it in the original query to the list.
>
> Load average (which is presumably the metric in question) includes
> both processes using the CPU and processes waiting for I/O.
> So it *would* be strange for load average to go up like that, if
> database configuration remains the same (ie: equal query plans)

Yep, that's the point. Iostat and vmstat reports a very low use of the
disks (lower than before the changes are made - perhaps because the cache).
Nothing changed in database itself.


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 12:14:50
Message-ID: 4E94333A.4040607@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Em 11-10-2011 03:42, Greg Smith escreveu:
> On 10/10/2011 01:31 PM, alexandre - aldeia digital wrote:
>> I drop checkpoint_timeout to 1min and turn on log_checkpoint:
>>
>> <2011-10-10 14:18:48 BRT >LOG: checkpoint complete: wrote 6885 buffers
>> (1.1%); 0 transaction log file(s) added, 0 removed, 1 recycled;
>> write=29.862 s, sync=28.466 s, total=58.651 s
>> <2011-10-10 14:18:50 BRT >LOG: checkpoint starting: time
>
> Sync times that go to 20 seconds suggest there's a serious problem here
> somewhere. But it would have been better to do these changes one at a
> time: turn on log_checkpoints, collect some data, then try lowering
> checkpoint_timeout. A checkpoint every minute is normally a bad idea, so
> that change may have caused this other issue.

I returned to 5 minutes. Thanks.

>> procs -------------------memory------------------ ---swap--
>> -----io---- --system-- -----cpu-------..
>> r b swpd free buff cache si so bi bo in cs us sy id wa st
>> 34 0 2696 8289288 117852 38432268 0 0 8 2757 2502 4148 80 20 0 0 0
>> 39 1 2696 8286128 117852 38432348 0 0 24 622 2449 4008 80 20 0 0 0
>> 41 0 2696 8291100 117852 38433792 0 0 64 553 2487 3419 83 17 0 0 0
>> ...Notice that we have no idle % in cpu column.
>
> You also have no waiting for I/O! This is just plain strange; checkpoint
> sync time spikes with no I/O waits I've never seen before. System time
> going to 20% isn't normal either.

Have I anything to detect which proccess was causing the system time
increasing ?

> I don't know what's going on with this server. What I would normally do
> in this case is use "top -c" to see what processes are taking up so much
> runtime, and then look at what they are doing with pg_stat_activity. You
> might see the slow processes in the log files by setting
> log_min_duration_statement instead. I'd be suspicious of Linux given
> your situation though.

Last night, I put another disk in the server and install Debian 6,
preserving the same structure, only poiting the olds data in the new
postgresql 9.0.5 compilation. Today, the problem persists.

And for all that asks: the performance is poor, unusable.

> I wonder if increasing the memory is a coincidence, and the real cause
> is something related to the fact that you had to reboot to install it.
> You might have switched to a newer kernel in the process too, for
> example; I'd have to put a kernel bug on the list of suspects with this
> unusual vmstat output.

I dont think that is a coincidence, because this machine was rebooted
other times without problem.

Best regards.


From: Luca Tettamanti <kronos(dot)it(at)gmail(dot)com>
To: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 12:50:55
Message-ID: CAKPcRGoFqhOAnHPK1Y+y7bwNLb6MCHV1ADoO9XwpYN0rjfEvbw@mail.gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On Mon, Oct 10, 2011 at 3:26 PM, alexandre - aldeia digital
<adaldeia(at)gmail(dot)com> wrote:
> Hi,
>
> Yesterday, a customer increased the server memory from 16GB to 48GB.

A shot in the dark... what is the content of /proc/mtrr?

Luca


From: Greg Smith <greg(at)2ndQuadrant(dot)com>
To: Leonardo Francalanci <m_lists(at)yahoo(dot)it>
Cc: "pgsql-performance(at)postgresql(dot)org" <pgsql-performance(at)postgresql(dot)org>
Subject: Re: Adding more memory = hugh cpu load
Date: 2011-10-11 15:32:48
Message-ID: 4E9461A0.3070008@2ndQuadrant.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 10/11/2011 04:57 AM, Leonardo Francalanci wrote:
> In fact, shouldn't those things be explained in the "WAL
> Configuration" section
> of the manual? It looks as important as configuring Postgresql itself...
> And: that applies to Linux. What about other OS, such as Solaris and FreeBSD?
>

There's at least 10 pages of stuff about this floating around my book,
including notes on the similar Solaris and FreeBSD parameters to tune.

As for why that's not in the manual instead, two reasons. The
PostgreSQL manual doesn't get too deep into things like operating system
adjustments for performance. It's big enough without that, and any
information that would be added is likely to get out of sync with new OS
releases. This project doesn't want to take on the job of documenting
every twist there. My book is less than a year old, and there's already
some material on this topic that's turning obsolete due to Linux kernel
changes. The PostgreSQL manual is shooting to still be relevant for
much longer than that.

Second, making an addition to the manual is the hardest possible way to
document things. The docbook toolchain used is picky and fragile to
malformed additions. And you can't get anything added there without
passing through a series of people who will offer feedback of some sort;
usually valuable, but still time consuming to process. Things need to
asked quite frequently before it's worth the trouble. I did a few blog
entries and mailing list posts about this earlier this year, and that
was as much documentation as I could justify at the time. If there's a
user-visible behavior changes here, that's the point where an update to
the manual would be in order.

--
Greg Smith 2ndQuadrant US greg(at)2ndQuadrant(dot)com Baltimore, MD
PostgreSQL Training, Services, and 24x7 Support www.2ndQuadrant.us


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load [solved]
Date: 2011-10-11 18:02:26
Message-ID: 4E9484B2.9040301@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Hi,

About 3 hours ago, the client contacted the Dell and they suggested 2
things:

1) Update the baseboard firmware (the only component that haven't
updated yesterday).
2) Change all memory chips to new others, instead of maintain the old
(16 GB) + new (32 GB).

After do this, until now, the load average does not surpasses 4 points.

The I/O wait returned to hit some values and the system % down to an
average of 5%.

Unfortunatly, we will never discover if the problem resides in baseboard
firmware or in RAM, but util now the problem was solved.

Thanks all for help !

Best regards


From: Claudio Freire <klaussfreire(at)gmail(dot)com>
To: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load [solved]
Date: 2011-10-11 18:05:54
Message-ID: CAGTBQpYU7P_qwbFT0txJRCGs0C+NzKT=mnFM0MSgjNUahAk9sA@mail.gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On Tue, Oct 11, 2011 at 3:02 PM, alexandre - aldeia digital
<adaldeia(at)gmail(dot)com> wrote:
> 2) Change all memory chips to new others, instead of maintain the old (16
> GB) + new (32 GB).

Of course, mixing disables double/triple/whatuple channel, and makes
your memory subsystem correspondingly slower.
By a lot.


From: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
To:
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load [solved]
Date: 2011-10-11 20:02:29
Message-ID: 4E94A0D5.2050500@gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

Em 11-10-2011 15:05, Claudio Freire escreveu:
> On Tue, Oct 11, 2011 at 3:02 PM, alexandre - aldeia digital
> <adaldeia(at)gmail(dot)com> wrote:
>> 2) Change all memory chips to new others, instead of maintain the old (16
>> GB) + new (32 GB).
>
> Of course, mixing disables double/triple/whatuple channel, and makes
> your memory subsystem correspondingly slower.
> By a lot.

The initial change (add more memory) are maded by a technical person of
Dell and him told us that he use the same especification in memory chips.
But, you know how "it works"... ;)


From: Claudio Freire <klaussfreire(at)gmail(dot)com>
To: alexandre - aldeia digital <adaldeia(at)gmail(dot)com>
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load [solved]
Date: 2011-10-11 20:08:05
Message-ID: CAGTBQpapTMNVff5ey1mrZ6+_+BMA6AFshv9H+pMVits9MQxN_A@mail.gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On Tue, Oct 11, 2011 at 5:02 PM, alexandre - aldeia digital
<adaldeia(at)gmail(dot)com> wrote:
> The initial change (add more memory) are maded by a technical person of Dell
> and him told us that he use the same especification in memory chips.
> But, you know how "it works"... ;)

Yeah, but different size == different specs

I do know how it works ;-)


From: Arjen van der Meijden <acmmailing(at)tweakers(dot)net>
To: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load [solved]
Date: 2011-10-11 20:33:44
Message-ID: 4E94A828.1040201@tweakers.net
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On 11-10-2011 20:05 Claudio Freire wrote:
> On Tue, Oct 11, 2011 at 3:02 PM, alexandre - aldeia digital
> <adaldeia(at)gmail(dot)com> wrote:
>> 2) Change all memory chips to new others, instead of maintain the old (16
>> GB) + new (32 GB).
>
> Of course, mixing disables double/triple/whatuple channel, and makes
> your memory subsystem correspondingly slower.
> By a lot.
>

That really depends on the chipset/server. The current intel E56xx-chips
(and previous E55xx) basically just expect groups of 3 modules per
processor, but it doesn't really matter whether that's 3x2+3x4 or 6x4 in
terms of performance (unless the linuxkernel does some weirdness of
course). It at least won't disable triple-channel, just because you
added different size modules. Only when you get to too many 'ranks',
you'll see performance degradation. But that's in terms of clock speed,
not in disabling triple channel.

But as said, that all depends on the memory controller in the server's
mainboard or processors.

Best regards,

Arjen


From: Claudio Freire <klaussfreire(at)gmail(dot)com>
To: Arjen van der Meijden <acmmailing(at)tweakers(dot)net>
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Adding more memory = hugh cpu load [solved]
Date: 2011-10-11 20:46:32
Message-ID: CAGTBQpb4-5V+r+feNRHc-SQYNetujC0HgsnHZ3v-WnNHZirFTA@mail.gmail.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Lists: pgsql-performance

On Tue, Oct 11, 2011 at 5:33 PM, Arjen van der Meijden
<acmmailing(at)tweakers(dot)net> wrote:
> That really depends on the chipset/server. The current intel E56xx-chips
> (and previous E55xx) basically just expect groups of 3 modules per
> processor, but it doesn't really matter whether that's 3x2+3x4 or 6x4 in
> terms of performance (unless the linuxkernel does some weirdness of course).
> It at least won't disable triple-channel, just because you added different
> size modules. Only when you get to too many 'ranks', you'll see performance
> degradation. But that's in terms of clock speed, not in disabling triple
> channel.
>

There are too many caveats to doing that, including how they're
installed (in which slots), the timings, brand, internal structure,
and whatnot, with all those details not always published, only sitting
in the module's SPD.

In essence, mixing is more probable to mess your multichannel
configuration than not.

That's why matched kits are sold.