Re: Sub optimal performance with default setting of Postgresql with FreeBSD 9.1 on ZFS

From: Patrick Dung <patrick_dkt(at)yahoo(dot)com(dot)hk>
To: "ktm(at)rice(dot)edu" <ktm(at)rice(dot)edu>
Cc: pgsql-performance(at)postgresql(dot)org
Subject: Re: Sub optimal performance with default setting of Postgresql with FreeBSD 9.1 on ZFS
Date: 2013-01-08 16:26:50
Message-ID: 1357662410.38270.YahooMailClassic@web190803.mail.sg3.yahoo.com
Views: Raw Message | Whole Thread | Download mbox | Resend email
Thread:
Lists: pgsql-performance

Hi Ken,

Thanks for reply.
After researching, I get more understanding with the importance of the ZIL
http://constantin.glez.de/blog/2010/07/solaris-zfs-synchronous-writes-and-zil-explained
So the performance issue is the ZIL...

BTW, using a standard UFS+software update is still slower than Linux or ZFS without sync.

Best regards,
Patrick

--- On Tue, 1/8/13, ktm(at)rice(dot)edu <ktm(at)rice(dot)edu> wrote:

From: ktm(at)rice(dot)edu <ktm(at)rice(dot)edu>
Subject: Re: [PERFORM] Sub optimal performance with default setting of Postgresql with FreeBSD 9.1 on ZFS
To: "Patrick Dung" <patrick_dkt(at)yahoo(dot)com(dot)hk>
Cc: pgsql-performance(at)postgresql(dot)org
Date: Tuesday, January 8, 2013, 2:28 AM

Hi Patrick,

You really need a flash ZIL with ZFS to handle syncs effectively. Setting
the sync_commit to off is the best you can do without it. Not that that
is bad, we do that here as well.

Regards,
Ken

On Tue, Jan 08, 2013 at 01:18:02AM +0800, Patrick Dung wrote:
> Hi,
>
> Updated information in this post.
>
> I have installed Postgresql 9.2.2 (complied by gcc) in FreeBSD 9.1 i386.
> The pgsql base directory is in a ZFS dataset.
>
> I
>  have noticed the performance is sub-optimal, but I know the default
> setting should be the most safest one to be use (without possible data
> corruption/loss).
>
> a) I use OTRS ticketing system version 3.1, the backend is PostgreSQL.
> The user interactive response is not slow (switching web pages or create a change).
>
> b) There is a benchmark in the support module of OTRS.
> It tested insert,update,select and delete performance.
> The response time is slow (>10 sec), except select.
>
> I have done some research on web, with below settings (just one change, not both), the performance returned to normal:
>
> 1) Disabled sync in the pgsql dataset in ZFS
> zfs set sync=disabled mydata/pgsql
> or
> 2) In
>  postgresql.conf, set synchronous_commit from on to off
>
> I know the above setting would lead to data loss (e.g.power goes off), any comments?
>
> PS:
> 1) I have tried to use primarycache/secondarycache=metadata/none, it do not seem to help.
>
> 2)
> I have tried the default setting on Linux too:
> RHEL 6.3, ext4, stock postgresql 8.x, OTRS 3.1.
> The web site is responsive and the benchmark result is more or less the same as FreeBSD with the 'sync' turned off.
>
> 3)
> For FreeBSD, same setting with Postgresql on UFS:
> The performance is between ZFS (default, sync enabled) and ZFS (sync disabled).
>
> Thanks,
> Patrick
>
> --- On Mon, 1/7/13, Patrick Dung <patrick_dkt(at)yahoo(dot)com(dot)hk> wrote:
>
> From: Patrick Dung <patrick_dkt(at)yahoo(dot)com(dot)hk>
> Subject: Sub optimal performance with default setting of Postgresql with FreeBSD 9.1 on ZFS
> To: pgsql-performance(at)postgresql(dot)org
> Date: Monday, January 7, 2013, 11:32 PM
>
> Hi,
>
> I have installed Postgresql 9.2.2 (complied by gcc) in FreeBSD 9.1 i386.
> The pgsql base directory is in a ZFS dataset.
>
> I have noticed the performance is sub-optimal, but I know the default setting should be the most safest one to be use (without possible data corruption/loss).
>
> a) I use OTRS ticketing system, the backend is PostgreSQL.
> The user interactive response is not slow (switching web pages or create a change).
>
> b) There is a benchmark in the support module of OTRS.
> It tested insert,update,select and delete performance.
> The response time is slow (>10 sec), except select.
>
> I have done some research on web, with below settings (just one change, not both), the performance returned to normal:
>
> 1) Disabled sync in the pgsql dataset in ZFS
> zfs set sync=disabled mydata/pgsql
> or
> 2) In
>  postgresql.conf, set synchronous_commit from on to off
>
> I know the above setting would lead to data loss (e.g.power goes off), any comments?
>
> PS:
> 1) I have tried to use primarycache/secondarycache=metadata/none, it do not seem to help.
>
> 2)
> I have tried the default setting on Linux too:
> RHEL 6.3, stock postgresql 8.x, OTRS 3.1.
> The web site is responsive and the benchmark result is more or less the same as FreeBSD with the 'sync' turned off.
>
> Thanks,
> Patrick

In response to

Browse pgsql-performance by date

  From Date Subject
Next Message AJ Weber 2013-01-08 16:45:49 Re: Partition table in 9.0.x?
Previous Message Jeff Janes 2013-01-08 15:26:06 Re: Partition table in 9.0.x?