Re: Best way to index IP data?

[Pomarede Nicolas <npomarede(at)corp(dot)free(dot)fr>]

On Fri, 11 Jan 2008, Andrew Sullivan wrote:

> On Fri, Jan 11, 2008 at 05:02:36PM -0500, Michael Stone wrote:
>
> > networks), but there's a conspicuous lack of a type for (hosts). I
> > suppose if you really are sure that you want to store hosts and not
> > networks
>
> Well, part of the trouble is that in the CIDR world, an IP without a netmask
> can be dangerously ambiguous.  I can see why the design is as it is for that
> reason.  (But I understand the problem.)
>
> A

Yes, in fact it all depends on the meaning you give to an IP.

If you want to store subnets, then you need an IP and a netmask, but if 
you just want to store the IP of a particular equipment (that is, the IP 
that will be refered to in the TCP/IP header), then there's no ambiguity, 
you just need 4 bytes to describe this IP.

And it's true for IPv6 too, storing an IP that refer to an end point and 
not a subnet is requiring twice as much data as needed, because the 
netmask would always be ff:ff:ff:..:ff

So, for people dealing with large database of IPs, it would be nice to be 
able to save 50% of the corresponding disk/cache/ram space for these IPs.


Nicolas